Landing Page Wifi
To ensure the landing page loads correctly, the following requirement apply:
A Wi-Fi router (or equivalent infrastructure) that allows you to set a URL as a landing page, without being overridden by a captive portal on Android or iOS.
Note: The information provided serves as a technical recommendation. Coordination with the responsible network technician is required for the specific implementation and configuration.
Touchscreen
For using the Guestnet web app on touchscreens, the following requirements apply:
Touchscreen with HDMI interface
Digital signage device or mini PC (see recommended hardware)
Stable internet connection (a LAN connection is preferable to WLAN)
The general Guestnet web app can be accessed directly. Adding the parameter
?infoterminal=1activates additional functions.
You can find more information here:
How to activate the display on touchscreens
Infoscreen
To set up a Guestnet infoscreen, you'll need:
Monitor or TV with HDMI input
Internet connection (LAN preferred over Wi-Fi)
Digital signage device or mini PC (see recommended hardware)
Demo:
Demo Infoscreen
Room TV
For in-room TV broadcasting via antenna:
TV (no internet connection required)
Digital signage device or mini PC (connected via HDMI to the modulator)
Modulator
Antenna cable
Additional notes:
Use only one video file to ensure uninterrupted playback
We recommend Full HD video files, as 4K videos may cause streaming delays depending on the connection
Demo:
Room TV Demo
Recommended Hardware
Digital Signage Device / Mini PC
These devices are designed for continuous operation (24/7) in the digital signage sector. They offer high stability, are suitable for kiosk mode applications, and support various resolutions.
Recommendation for info screens (without video):
Model: XD236Recommendation for touchscreens and info screens with video:
Model: XD1036
Contact person: Your installer
BrightSign Devices – Important Notes
Device support depends on the series and firmware:
BrightSign Series 3 will no longer be supported from October 1, 2025
BrightSign Series 4 is supported but requires a firmware update
BrightSign Series 5 must be manually upgraded to Chromium 120 by a technician
Setup guide:
Upgrade to Chromium 120
Modulator
A modulator converts HDMI signals into a digital broadcast signal for in-room TVs via antenna distribution.
Two common formats:
SD MPEG-2 (older TVs) and HD MPEG-4 (newer TVs)The correct modulator depends on the TV resolution and antenna setup.
Contact: Your antenna technician